Need new Diff cover
#1
Newbie
Thread Starter
Join Date: Sep 2010
Location: Catonsville, MD
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Need new Diff cover
I need to replace the rear diff cover. I was thinking Rockcrusher? I think its the C8.25. Any suggestions will help.
Last edited by BryDogg; 10-14-2010 at 02:56 AM.
#3
Seasoned Member
Join Date: Apr 2010
Location: Bloomington, MN
Posts: 440
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 I6
Yup, that's a Dana. Get an ARB and tell me what you think? Seriously though, they are supposed to be bad *** diff covers.
Last edited by Anthonyb; 10-14-2010 at 05:09 AM.
#4
Honorary Moderator
Join Date: Mar 2010
Location: Gilbert AZ/Las Cruces NM
Posts: 8,135
Likes: 0
Received 13 Likes
on
11 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
If the Diff itself has a flat bottom it is a C8.25 if it has a round bottom it is a D35. It looks like a dana 35 but hard to say from that picture.
There is a vender on here that sells Diff covers. Look in the vender section. They are great prices and the toughest cover you will ever need
3/8"
There is a vender on here that sells Diff covers. Look in the vender section. They are great prices and the toughest cover you will ever need
3/8"
Trending Topics
#10
CF Veteran
Join Date: Nov 2009
Location: The Republic of TEXAS
Posts: 8,172
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L HO
If u change covers, the fill hole needs to be at the same level as stock, in relation to the axle tubes. If not, u could over/under fill the diff, depending on where the fill hole is on the new cover.
Thread
Thread Starter
Forum
Replies
Last Post
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-08-2023 07:08 AM
ROCKRIDGE 4WD
Vendor Showcase
1
05-23-2016 06:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)