Need help with bumpstops
#1
Member
Thread Starter
Join Date: Aug 2010
Location: Frederick, MD
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L Straight six
Need help with bumpstops
I recently cut and folded my fenders on my '00 XJ... While I had the rear tires off I found out that my bumpstops are ****! I pulled one off by hand. I also just recently put 30's on so I am going to need bumpstops if I hit the trails (especially once I take out that damn sway bar). My question to y'all is what are the best bumpstops to get? I would like to get a front and rear set (might as well do it right) and Im not scared to weld in rather than bolt on. I will more than likely be lifting 3" and may run a larger tire not too long after that so maybe adjustable bumpstops? Just let me know what y'all think I should do. Im mainly a JK guy so Im more familiar with the wranglers... Any help would be appreciated.
#3
Member
Thread Starter
Join Date: Aug 2010
Location: Frederick, MD
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L Straight six
It doesnt cause problems with rubbing? Im really worried about my tires rubbing my fenders because if the way I cut and folded... Those little one inch pieces of fender will probably cut a tire in a second.
Thread
Thread Starter
Forum
Replies
Last Post
ktmracer419
Modified XJ Cherokee Tech
503
02-16-2024 03:00 PM
xj_maniac_newb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-17-2010 11:35 PM
muddeprived
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-11-2009 07:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)