Need advice
CF Veteran
Joined: Oct 2009
Posts: 2,867
Likes: 16
From: Fauquier County, Virginia
Year: 1991
Model: Cherokee
Engine: I-6 4.0 HO
Uh... most guys I know with over 3 inches of lift usually run either a t-case drop, or the better option of an SYE (slip yoke eliminator). I'm not the best with higher lifts, but I dont know what height it is when you start to run into suspension issues (LCA's, UCA's, sway bars, etc..).
Hopefully someone with more knowledge and experience will chime in. Good luck man!
Hopefully someone with more knowledge and experience will chime in. Good luck man!
CF Veteran

Joined: Oct 2010
Posts: 2,150
Likes: 12
From: Ontario, Canada
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 L 6 Renix
check out gojeep.com from aussie for some home brew ideas you can apply (like TCase drop spacers). Your Trac bar will be pullin front to the side at 4" lift, need longer or adjustable, perhaps new hole at lower end 3/4" over and 1/8" up toward driver side may do in interim. Drop your front brake line hard line to flex line brackets way down inside your front wheel well so you don't pull off a brake line, remount your rear line lower down your frame, or get longer lines for both ends, full size dodge truck or dakota lines can work at the rear, skyjacker has longer stainless braid replacements available also.
Thread
Thread Starter
Forum
Replies
Last Post
jpmarine6786
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
43
Oct 22, 2023 04:16 AM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Sep 30, 2015 11:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



