the 3m stuff is amazing i saw it on trucks also and it should clear your problem right up. with a little elbow grease your jeep will look clean. im going to use the stuff on the 4x4 logos to get an extra clean look

 

ok now im confused, is it 3m eraser or mr clean eraser?

 

its 3m eraser

 

ok good cause i figured bleach would mess up the paint

 

but what do you guys think about bedlining it? i figure i might as well have a back up plan in case i F%$^% it up lol, i was figuring if i had to do it, maybe have it linex ed or do it myself if its alot cheeper

 

get a razor blade. wrap some masking tape around the edges and have the blade exposed in the middle. then u can safely scrape the gunk off. i hafe done it countless times. just be careful around the edges and keep it flat with the metal. it sounds a little scary but it works

 

i used simply a razor blade and an hour of yyour time and very carefully you will be fine. if neccary take a hair dryer and warm it up

 

i used bedliner on mine. it came out pretty damn good imho

 

i had a good sharp edge, but still it chipped some paint off. I think the problem is that the PO put something on there to put it back on when it was hanging off.

 

so if you had to do it again, would you do it yourself? or have someone like linex do it for you?

 

im tellin you that 3M wheel will work its crazy the way it worked i dont have a link but look it up you should be ale to find it or just call oriellys or autozone or what ever your local partrs house is

 

does it work with a drill or what? and if i dont know what im doing, will i screw up my paint job?

 

yeah it goes in a drill and i dont think so i think its too soft to take off paint but it will remove the foamy hard gunk and anything else

 

YEAHH! CHECK IT OUT!

 

i just googled 3M eraser wheel