If they're all the same then I'm pretty durn sure thats the way they're supposed to be.

 

so do you think that they will hurt my ecm if the factory inj are suppose to 14 ohm?

 

The ford injectors have been used alot by jeepers. I would use them in mine.

 

ok man may be you or some one else could ohm thiers out and see what kind of readings they get on theirs

 

I got the neon injectors in mine and they are right at 13 ohms.......maybe someone with the fords will chime in.

 

All of the ford injectors recommended in this thread are specified 15 ohms by the manufacturer.
AGAIN WHAT IS THE PART NUMBER?

 

yellow top 0280150556 pink top 0280150561

 

well.... if you put in one of the ford injectors mentioned above it will work. If you just chuck in any ford injector you happen have lying around well then probably not.

 

ok so i just went down to my dads shop and used my old ohm meter and it says that they are 14.4 ohms so thats good may be the i used where i work is just reading off. hey rainman so the part # i listed are right?

 

just bought ford racing bosch gen III 24lb for $75 gonna try them n see how they work

 

Huh? No. Where Has anyone said they were good to use / are those part numbers listed?
Read this.
http://www.ausjeepoffroad.com/forum/...ad.php?t=92236

 

New numbers on my Neon Injector install.
http://www.ausjeepoffroad.com/forum/...33#post1063433

 

put my new injectors in. ran a lil rich idling at first but its leaned out now. runs like a champ way better then before

 

Oh btw thanks rainman and coas. couldnt have figured this out without your vast knowledge

 

i read through until page 8 and then got so confused i thought id post.

Found these Mustang injectors on Craigslist.

a site says that they run 19#/hr @ 32 PSI, P/N E6TE-A3B

i have a 92 4.0HO, Can i run these?

sorry if this is a repetitive post, i cba to read through 18 pages.