the front shocks of my 99 jeep cherokee has a shock stem eliminator installed... however i have JK Rubicon shocks to replace them, but those have a stem at one end... what should i do. And now my laptop keyboard is all greasy because I thought I wasn't going to need help with this lift ... ha

 

just take the stem eliminator out the JK shocks will bolt in place of it

 

It's welded to the unibody, plus im not sure what a stem mounted shock should look like when installed...

is their a way to make a stem shock into a hoop/loop shock

 

look at the top of it, it should just be a nut holding the bolt. and it should come out.

from the tom i mean open the hood and you should see a bolt and washer one near the brake booster and the other kinda near the battery

 

THANK YOU... i feel like an idiot now... but i was panicing this is my daily driver so i was trying to figure out a way to get new shocks or what ever part i was going to need... hopefully the rest of the lift goes smooth... I appreciate your help

 

np man, trust me I've been there before on other rigs with it not drivable and spending 3 hours to figure something out that was right there. it happens that's why we are here.