Map vacuum help!
03-17-2018, 07:13 PM
#1
Newbie
Thread Starter
Join Date: Mar 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
Map vacuum help!
Okay so I’ve searched on here and I haven’t found a solution. I was checking my Map sensors vacuum line for cracks or leaks when it snapped in half. I used a peice of 1/8 vacuum hose and spliced the ends back but now when I start it will just immediately die. Its pulling good vacuum but won’t run.
Its an 89 XJ 4.0 also
Its an 89 XJ 4.0 also
03-18-2018, 03:36 AM
#2
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Okay so I’ve searched on here and I haven’t found a solution. I was checking my Map sensors vacuum line for cracks or leaks when it snapped in half. I used a peice of 1/8 vacuum hose and spliced the ends back but now when I start it will just immediately die. Its pulling good vacuum but won’t run.
Its an 89 XJ 4.0 also
Its an 89 XJ 4.0 also
03-18-2018, 07:54 AM
#3
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,867
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Okay so I’ve searched on here and I haven’t found a solution. I was checking my Map sensors vacuum line for cracks or leaks when it snapped in half. I used a peice of 1/8 vacuum hose and spliced the ends back but now when I start it will just immediately die. Its pulling good vacuum but won’t run.
Its an 89 XJ 4.0 also
Its an 89 XJ 4.0 also
Thread
Thread Starter
Forum
Replies
Last Post
jai05002
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-25-2024 05:05 PM
67 GMC
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
12-27-2014 07:04 PM
RenegadeT
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
06-30-2012 05:33 PM
DEOR
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
10-10-2011 05:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)