lubro moly mos2
#1
Seasoned Member
Thread Starter
Join Date: Nov 2011
Location: pa!
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
lubro moly mos2
Who eles here uses lubro moly mos2?
I been lurking on Bitog forums and I finally found some at napa, I usually don't use any snake oil but this stuff is the real deal ( uoa and voa off Bitog ) I used it tonight,
It worked as intended, and you can "feel" the difference while driving etc, no it didn't add 1000hp but it did what it supposed to do, anyone eles run it and how was your experience?
I been lurking on Bitog forums and I finally found some at napa, I usually don't use any snake oil but this stuff is the real deal ( uoa and voa off Bitog ) I used it tonight,
It worked as intended, and you can "feel" the difference while driving etc, no it didn't add 1000hp but it did what it supposed to do, anyone eles run it and how was your experience?
#2
CF Veteran
Join Date: Nov 2011
Location: Edmonton
Posts: 2,322
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
Well I've heard things like it takes the noise level down in the valve train, and gives maybe .5 mpg...interested to hear how it works for you...how much goes into the case? Is it a percentage of total volume?
#3
Seasoned Member
Thread Starter
Join Date: Nov 2011
Location: pa!
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
After reading the back of it, and from Bitog, one can for about 5-6 quarts, you have to have to have to do it while its hot, and run it for at least 20 minutes or a nice long drive with some varying loads, to help it harden in the metal, also after I did it I dawned on my all the mechanical things in my engine its going to help besides my cam/lifter/valvtrain, like my oil pump will have a use for the moly and so will the hydraulic lifters! Honestly I don't get excited about snake oil bur after my research and personal experience, I think I found one worth 5.99 an oil change haha
#4
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,863
Received 1,524 Likes
on
1,236 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Bitog recommends it?
#5
Seasoned Member
Join Date: Dec 2010
Location: NY
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I used it in the Jeep that is now totaled and my Mazda MPV -I think it said 4oz per 5 quarts or so . Moly lube is a well known lubricant and I think it comes stock in ferraris or Porsches -one of the tiptop of the line cars out there. I havn't realized a difference but if itd good enough to come stock in a 200K car it can go in mine.
Thread
Thread Starter
Forum
Replies
Last Post
RWKHausSupply
Vendor Showcase
4
10-22-2015 01:12 PM
RWKHausSupply
Vendor Showcase
1
06-21-2013 03:44 PM
RWKHausSupply
Vendor Showcase
7
12-17-2012 04:19 PM
Charlyuy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
01-05-2011 01:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)