lower rc control arm problem
#1
Junior Member
Thread Starter
Join Date: May 2010
Location: Wisconsin and Colorado
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 IL6
lower rc control arm problem
So i put the new rough country adjustable control arms in today and the lowers hit on the axle where the shocks mount to. Is it possible that rc sent me the wrong control arms?
I have a 87 xj and installing rc 4.5 lift
I have a 87 xj and installing rc 4.5 lift
#6
Junior Member
Thread Starter
Join Date: May 2010
Location: Wisconsin and Colorado
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 IL6
the control arms they sent me are not bent at all. i was thinking that it could be at full flex. there is nothing else hooked up. looked to me that it wasnt low enough to be at full flex but what do i know.
Trending Topics
#8
CF Veteran
Join Date: Nov 2008
Posts: 2,003
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
RC designed their new adjustables to work with the drop brackets. they extend far enough, but there is NO BEND in the lowers.
end result, they're useless unless you like improper caster angle.
I had the same problem on mine. ended up torching the hell out of the shock mounts because I didn't have time to wait...and i still couldn't get it quite right at 6.5".
call RC and tell them your problem.
and, FYI, I've NEVER had a single other problem with RC other than this. I like their products.
end result, they're useless unless you like improper caster angle.
I had the same problem on mine. ended up torching the hell out of the shock mounts because I didn't have time to wait...and i still couldn't get it quite right at 6.5".
call RC and tell them your problem.
and, FYI, I've NEVER had a single other problem with RC other than this. I like their products.
#11
Junior Member
Thread Starter
Join Date: May 2010
Location: Wisconsin and Colorado
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 IL6
I got it all figured out, installed the drop brackets and put the control arms and coils in today....finally some progress.
#12
Newbie
Hey Aaron. I'm having the same problem as you. When the axle is all the way down full flex it seems to get stuck on the lower shock bracket. What was your fix? (or anyone else). Did you have to buy an extra parts to help out? I'm tempted to cut out a small piece of the shock bracket - but i feel like that should be last resort. Has anyone adjusted the top control arms to compensate for the lower control arms? I'm stuck with my lift until i get past this
any help would be awesome. its the 4.5 RC X-series lift BTW. Thanks guys.
any help would be awesome. its the 4.5 RC X-series lift BTW. Thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
ROCKRIDGE 4WD
Vendor Showcase
0
08-28-2015 12:28 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)