Yes, 2.5 from 86 on has a CPS.

 

my 2.5l has a new plugs wires rotors fuel filter and it hesitates when speeding up and accelerating uphill i can here pump when turn key.have not checked pressure.where can i check before pulling pump

 

i like this place

 

Auto trans or stick?

 

5 speed

 

Good chance the material that has worn off your clutch is stuck to the CPS since it is magnetic. Sometimes you can get by with removing the CPS and cleaning the debris off the tip of it so it generates a stronger signal. Got a voltmeter? You can check CPS output.

 

I Have replaced all the neccasary items and mine still takes about 3 seconds to start the 89 just take a little bit longer to get up the rpms before they start

 

Get a pressure gauge and check your psi at the fuel rail should be something like 31 psi or more if its low pull the pump and replace it

 

mahalo i will clean my cps and see. whats your opinions on injector cleaner? my friend says lubro-moly is a good product.

 

BG 44K is the absolute best. Most often found at higher end repair shops that deal in European cars. Ain't cheap, but worth it.

 

So i pulled cps had a chip how i dunno but replaced anyway seemt to wanna crank faster but still hesitates. So now im gonna try to clean throttle body it looks dirty and see from there i guess it need some tlc i havent payed enough attention its been a solid jeep i go on the sandy beaches a dirt roads with confidence so now its time to give back this is an awesome place to connect with other jeep cherokee drivers Much Mahaloz if you guys have anything to add to keep the pearl purring please reply! Aloha be backsoon

 

When accer8ing does the fuel pressure increase to accomadate demand . I had a yj that needed a fuel pump and that solved it. I dont have any codes flash so im leaning toward a fuel pump to solve all this hesitation issues.

 

Have you ever removed the ground strap that attaches to the firewall and scraped the paint off of the firewall, cleaned the eyelet and reinstalled it? They were a problem here in Arizona. I can only imagine what that cable looks like after living in Hawaii. I'd replace it with a #4 cable if it were me.

 

i see the cable its covered in oil and dirt will do......

 

Scrape the firewall to bare metal.