lift question
Thread Starter
Junior Member
Joined: May 2009
Posts: 87
Likes: 0
From: arvada, colorado
Year: 1999
Model: Cherokee
Engine: 6 cylinder
i have a 99 jeep cherokee with the 4 and half rc lift kit, i was wondering if i put on a 2" coil spacer and a 2" adjustable shackles will the shocks be maxed out, on rc website it says the shocks are 4" to 6" , another question will i have to drop my transfer case more?
CF Veteran
Joined: Apr 2009
Posts: 1,097
Likes: 1
From: Jacksonville, FL
Year: 1989
Model: Cherokee
Engine: 4.0L
You will be ok to drive on but not flex well. Your shocks will max out. Also, on that newer year you will prob need a SYE and if not u for sure will need the trans drop. Also, you may need to look into getting the control arm drop brackets to make for a better ride.
Thread Starter
Junior Member
Joined: May 2009
Posts: 87
Likes: 0
From: arvada, colorado
Year: 1999
Model: Cherokee
Engine: 6 cylinder
i wont be flexing for a while, i will get new shocks before then, and i already have the trans drop the came with the lift kit, should i get another one and add it to it? and are sye hard to put in by yourself? sorry about all the questions i will get the drop brackets
CF Veteran
Joined: Apr 2009
Posts: 1,097
Likes: 1
From: Jacksonville, FL
Year: 1989
Model: Cherokee
Engine: 4.0L
No. Do not double up with trans drop. Sye can be hard. There are two types the full sye were u take apart the transfer case and the hack and tap. Diff cost and diff skills needed.
Trending Topics
Thread Starter
Junior Member
Joined: May 2009
Posts: 87
Likes: 0
From: arvada, colorado
Year: 1999
Model: Cherokee
Engine: 6 cylinder
got it all installed just took me 10 hours to do but it looks good, and no vibration from the driveshaft, but still going to get the sye, thanks for the help
I also have the same question/lift different year rig. My question was, would it be cool to add the spacer lift to my existing lift and if so would my shocs be absolete? I plan to also get the SYE , but was unfamiliar with control arm drop brackets. Where/how do I go about getting those? My overall goal is to clear 35" tires. Would this be possible? Thanks.
CF Veteran
Joined: Apr 2009
Posts: 1,097
Likes: 1
From: Jacksonville, FL
Year: 1989
Model: Cherokee
Engine: 4.0L
I also have the same question/lift different year rig. My question was, would it be cool to add the spacer lift to my existing lift and if so would my shocs be absolete? I plan to also get the SYE , but was unfamiliar with control arm drop brackets. Where/how do I go about getting those? My overall goal is to clear 35" tires. Would this be possible? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
Mar 4, 2023 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



