knock from engine
11-13-2011, 01:34 AM
#1
Newbie
Thread Starter
Join Date: Aug 2011
Location: michigan
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
knock from engine
what is the easiest way to check the fly wheel bolts on my 99 cherokee sport 4.0L. aw4 trans.
Last edited by kyley1008; 11-13-2011 at 01:41 AM.
11-13-2011, 05:45 AM
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,872
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Where the engine meets the trans there is a tin shield in the shape of a quarter moon. Remove the shield and shine a light up in there. Rotate the engine over by hand, clockwise, using a 3/4" socket on the front crank pulley until a bolt appears to you. Using a 15mm wrench, remove teh bolt. Add LocTite to the threads and reinstall it. I don't know the torque spec. I just get them as tight as I can with a long box end wrench. Rotate the engine and do the same with the next 3 bolts.
Thread
Thread Starter
Forum
Replies
Last Post
jeefersjeepers
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-20-2023 12:51 PM
jhamXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
11-09-2021 08:20 AM
Jamesmon4
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
08-16-2016 09:04 PM
carson
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 08:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)