at the jy.. need some tips
#1
Seasoned Member
Thread Starter
Join Date: May 2011
Location: Placentia, CA
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 L
at the jy.. need some tips
I'm trying to pull a hub bolt off the back of the front hubs. These things are really on there. Is there something I need to take off first? Or do I just need to put a little more oomph into it?
#3
CF Veteran
They are on pretty damn tight and the rust etc doesn't help. Use a big breaker bar.
EDIT: just realised you meant the hub bolts, be careful on them, they can snap lol. Just hope for the best?
EDIT: just realised you meant the hub bolts, be careful on them, they can snap lol. Just hope for the best?
#5
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
use the box end of a 13mm then use the box end of another on the open end of the 13mm double strength pulling power
Thread
Thread Starter
Forum
Replies
Last Post
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
11-26-2015 12:04 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
09-29-2015 06:33 PM
2000JGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-23-2015 08:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)