Jacking points
#1
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 99
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Jacking points
New to Jeeps...just got a 96 Cherokee Country with oil leaks!! Wondered where a guy jacks the front up to put jack stands to hold it up. Where do all these go?
#3
CF Veteran
Join Date: Nov 2008
Location: Eugene, OR
Posts: 1,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0L I6
for the front you can use the floor jack on the pumpkin, then for the other side use the floor jack on your LCA mount b/c when you jack it up from the pumpkin it only lifts the D side tire off the ground. then use the stands either on the axle tubes or if they will fit, where your LCA's mount to the axle at a safe height that will still give you enough room to work. or, you can jack it up and put stands on the frame rails close to the front of the vehicle. also, try and avoid stacking the jack stands on things such as wood blocks. it might seem like a good idea, but i've seen it be very unsafe.
Thread
Thread Starter
Forum
Replies
Last Post
evguy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
09-27-2015 10:58 AM
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-26-2015 07:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)