Jeepxj246

(I have a 93 xj rhd completely stock)So for 4 weeks now my jeep been intermittently cutting out while driving, the first time it that happened it was giving me the check engine code 11 so I change my crankshaft sensor and my external fuel filter, and it was running fine for 2 weeks then on the highway one day while at like 4000rpm it began to stuttering and the speedometer went to 0 and the rpm was moving between 3000 and 4000 but the engine was off no power steering then I got code 54 so I changed distributor and it was still happening so I changed my pcm but now it only happens when I reach a certain rpm while driving. Can anyone help me? Should I check my fuel pump? Or my coil?

Roler

That was one loooong sentence....


https://www.cherokeeforum.com/f2/com...de-54-a-94684/

Jeepxj246

my bad, wanted to get all the details in

Sig220

Roler like many of us, likes proper punctuation as it makes your post easier to read and even more important easier to understand. Having a older Jeep XJ, its hard finding parts sometimes and I would think harder if you are in Barbados!
Likely, the camshaft positioning sensor is your demon as he referenced by the link. Good Luck!

lawsoncl

The failure rate on new chinese made sensors is pretty high. Also check that when you replace the crank sensor that the wiring isn't touching the exhaust.