So before I begin, here is a little background on the jeep

99 Cherokee classic
4.0L
192,000 KM
Auto
NP231
D30/35
3'' Zone lift (springs, full leafs, new shocks)
Track bar relocation (re-drill)
Ecco wheels, 235/75/15 tires

The rest is stock.

Starting this morning, I've been hearing a click/pop intermittently on acceleration a decelleration. I also feel it in the drivers side floor, as well as in the door oddly enough. If I start off easy it doesnt do it, only when I give it a little extra something off the line.

I've crawled underneath and made sure everything was tight, and the tie rods/ ball joints have no play (they were replaced 2 months ago on both sides, uppers and lowers). The only thing in need of replacing or that has SLIGHT play is the drivers axle shaft u-joint, but not enought to clunk like that.

Has anyone experienced these symptoms, or are there any ideas what could be causing it? Any help/advice would be greatly appreciated.

Thanks all

 

Check your bushing on your UCA and LCA.

 

I was thinking that aswell... Thanks for the suggestion. I'll have a gander at them shortly.

Anyone else??