Interior lighting
#1
CF Veteran
Thread Starter
Join Date: May 2008
Posts: 2,914
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1987
Model: Comanche
Engine: I6 4.0L
Interior lighting
Okay I am a new cherokee owner and dont know anyone who has one so help me out here when i turn on my lights (running, headlights, my one working fog, ect.) anyway my T case selector lights up so u can read 2hi, 4FL, 4PT, N, 4LO any question is does the gear selector normally light up on your jeeps so you can read park, Reverse, Neutral, Drive i ask this because mine does not light up and it seems odd to me
#2
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
The newer ones like yours may be different but my old junk has multiple bulbs that illuminate the gear selector selections. You may have a bulb burned out.
#4
Do you hear banjos?
You should be able to pull the cover from around the shifter, and the bulb fits into the back of it. I don't remember the size of the bulb, but they are very common. HTH!!
#6
CF Veteran
Thread Starter
Join Date: May 2008
Posts: 2,914
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1987
Model: Comanche
Engine: I6 4.0L
Alright so i ran out into the garage and investigated a little bit but im stumped heres why (i took pics too)
A pic of my setup
heres a pic that show the T case lit up but not the gear selector
After i took the pic i just poped the cover off (which was very easy i must say) and after looking at all the linkage cause its cool i realized that there are no bulbs and no harness you can clearly see the wires running down to the Tcase lever for the lights if you look closely you can see to groups of wires running down there do you think both bulbs are down there? or what?
A pic of my setup
heres a pic that show the T case lit up but not the gear selector
After i took the pic i just poped the cover off (which was very easy i must say) and after looking at all the linkage cause its cool i realized that there are no bulbs and no harness you can clearly see the wires running down to the Tcase lever for the lights if you look closely you can see to groups of wires running down there do you think both bulbs are down there? or what?
Trending Topics
#9
CF Veteran
Thread Starter
Join Date: May 2008
Posts: 2,914
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1987
Model: Comanche
Engine: I6 4.0L
So do you guys think it is tucked down by my T case indicator how do i get down there i was messing with the pannel and it doesnt look like it pops up like the tranny one
#14
Go to the auto parts buy a small bulb and socket splice it to the wires that go to your transfer case shirt window. Install new bulb and socket any where you get the amount of light you want on your P-N-D selector window. If you dont want to drill or screw clean good use a gob of silicon RTV your choice of colors I faver clear. let sit for 24 hours your good to go. spray a little wd-40 or something similar on you shift pivota and linkage and a little grease where the lockin assy part is it will glide beween park and drive,, Good luck
#15
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Loosen the console. I bet what you need is down in there somewhere close to the set of wires feeding the transfercase selector window. You may get rich too. I found 47 cents inside mine. Just a few screws to get the whole thing loose if it is like my older one.
Last edited by BlueXJ; 08-31-2008 at 02:45 AM. Reason: Addishuns an spellinzs