Is Scranton near you guys?
btw nice xj

 

roughly an hour above you,near bloomsburg..your the closest person i've seen to me on the forums..any good wheeling down there?

 

yea,i'm about an hour south of scranton

 

you are going to need a lot of trim to stuff 33's under there. unless you don't want a lot of flex room. looking at the pics, it looks like you would be better off with 31's.

 

There are many many miles of State Forest trails all around my home that I occasionally drive on when I'm going through withdraw or just want a birds-eye view of the county. These trails are nothing hardcore..or even remotely close..just very scenic w/ a few tiny play areas.

There's areas here in Perry County that would be prime wheeling material..however it's all private property. I just go to Rausch Creek. It's about 1hr 15 mins. from me but well worth the travel time to get there.

As for XJ's or Jeeps in general in Perry County..I see 'em every now and then. Most are in Cumberland County (Carlisle) where I work. A couple of them frequent the NAXJA site. I'm "89XJPIG" over there.

 

hey thats like the office tv show.What size should i get im not sure?

 

Looks like 33's would be to big plus regearing would be needed i would look into 31's or 32's

 

seed there rausch creek my heep is in wilkes bare

 

i've been wanting to go to raush creek,one of these days i'll get there..i haven't had alot of time the past couple years since starting a family, free time is almost non exsistant,sucks they shut down paragon,it was awesome there...your rig is in wilkes-barre where are you?..i'm real close to wilkes-barre

 

Paragon didn't shut down..they simply re-located..lol! Seriously though..Paragon was badass and I'd love to see it re-opened but that doesn't look too likely.

I don't think you'd be disappointed w/ RC though.

 

from what i heard paragon leased that land and now they're building an airport there or something like that,idk...what do you mean they re-located?

 

so if i get 32s i wont have to trim a lot and i dont need new gearing?

 

im looking at pepboys tires they have 1s 4 100 to 110 dollors that r knockoffs of bfg mt and ats that r made by cooper tires.what do u guys think?

 

Very nice Drewdertuder! Glad to see you got the lift done! It looks real good.

I was also thinking about 33s on my 3" lift as well but the amount of trimming needed has kind of turned me off of the idea for now, I'm probably gonna just go with some 31s and trim anyways. I'm also interested in hearing about the Cooper M/Ts available at pep boys as I recently found out about them and the price is friggen RIGHT!

 

im from nj its at a friends house. I took it and moved it cuz me and my heep got back stabbed by are old friends.