Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

"Injector circuit open - cylinder 5"

Thread Tools
 
Search this Thread
 
Old Jun 21, 2011 | 12:51 PM
  #1  
TCSwizz's Avatar
Thread Starter
Newbie
 
Joined: Sep 2009
Posts: 22
Likes: 0
From: New Hampshire
Year: 1996
Model: Cherokee
Engine: 4.0L I6
Default "Injector circuit open - cylinder 5"

Hey everyone. the name's trav. i have a 96 cherokee country, 6 cylinder, auto, 4x4. And also, my CEL came on the other day (which irritated me to no end haha). I drove around some more, shut it off and yesterday it was fine. Now, this morning i start it up to go to work and the dang light is on again. Only this time it ran funny. It chugged a little bit, was alittle slow taking off and didn't sound like the HEEP i love. So i called my boss, irritated him with my issue :P and then threw the OBD scanner to it. Code comes up as P0205 "Injecter Circuit Open - Cylinder 5".

-What is this 'open' circuit persay? Does that mean the injector is over squirting fuel or that it isn't working?

- Also, could it be just the connector to the injector? Because from my understanding, and please correct me if im wrong, an open circuit means that the circuit is allowing the flow of electricity to pass. Which is the way its supposed to work.

- Some have said that it could be the TPS, or CPS sending mixed data. I think i have a loose bolt(s) on the flex plate and or/torque converter. Could the rattling have shaken the CPS up a bit to the point where it is malfunctioning?

Im fairly mechanically inclined but the electrical stuff is over my head. Any help at all would be most appreciated

THANKS!!
Trav
Reply
Old Jun 21, 2011 | 05:17 PM
  #2  
tjwalker's Avatar
CF Veteran
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2010
Posts: 5,841
Likes: 117
From: In the middle of Minnesota!
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Trust the code.

An open circuit means that the circuit has a spot somewhere that is NOT allowing the signal to move through. OPEN=BAD as far as circuits go.

The #1 thing to do is to inspect the connector and all wiring associated with the injector. And if you don't find anything, then swapping the #5 injector to a different cylinder and see if the misfire code follows. If it does, you know what injector to replace.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
Matt Krumwiede
Modified XJ Cherokee Tech
2
Aug 5, 2016 11:37 PM
Travis88XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
19
Mar 12, 2016 07:26 AM
travs2448
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 23, 2015 11:36 AM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 8, 2015 10:49 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:16 AM.