Ignition Switch Install
Newbie
Joined: Dec 2009
Posts: 15
Likes: 0
From: Charleston SC
Year: 96
Model: Cherokee
Engine: 4.0 HO Country Edt.
Just replaced mine on Tuesday of this week...
take the steering colum cover off you will need a torque bit with the security pin in them... there is 3 screws you pull and unplug 2 wires... took me about 30-45 min.. give me a call if ya like I will try and help you over the phone if I can... I will pm you my #
take the steering colum cover off you will need a torque bit with the security pin in them... there is 3 screws you pull and unplug 2 wires... took me about 30-45 min.. give me a call if ya like I will try and help you over the phone if I can... I will pm you my #
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Sep 8, 2015 06:28 AM
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 3, 2015 06:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)