Ignition switch...
09-22-2011, 06:23 PM
#1
Member
Thread Starter
Join Date: Jun 2009
Location: Kyle, TX
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
Ignition switch...
Hey would it be possible to pull out the brown wire connector deal, clean it up splice and put it back in??
09-22-2011, 06:28 PM
#3
Seasoned Member
Join Date: Mar 2010
Location: Modesto
Posts: 379
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0 high output straight 6
Use a safety pin through the front of the plug to push down the small metal tang that keeps the wire clipped into the plastic housing. Its fairly simply to de-pin a plug so it should be fairly easy.
09-26-2011, 02:45 PM
#4
Member
Thread Starter
Join Date: Jun 2009
Location: Kyle, TX
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
Cool thanks! That did the trick, but I used a small flathead screw driver...ended up cracking the blue connector!!! It was kinda fragile from where it was burnt!!
09-26-2011, 02:58 PM
#5
Member
Thread Starter
Join Date: Jun 2009
Location: Kyle, TX
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
Oh another question...On the new ignition switch, is that blue deal supposed to come out or is it supposed to stay in???
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
03-10-2021 05:52 PM
ra.stewart
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
02-15-2021 01:47 PM
Jeremy Millner
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
10-02-2015 02:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)