I snapped the wire linking the CPS to its connecter. How screwed am I?
Thread Starter
Seasoned Member
Joined: Dec 2016
Posts: 391
Likes: 10
From: Lawrence ****ing Kansas
Year: 1997
Model: Cherokee
Engine: 4.0
I snapped the wire linking the CPS to its connecter. How screwed am I?
I removed the engine head and, while I had it disconnected it from the wiring harness, I accidently left the CPS's electrical connector attached to the head. And when a friend and I pulled the head off, I didn't see or feel it and it just broke the wire
Here's the worst part though, the wire broke at the exact point where it exits the bell housing.
Is this going to be a big problem? Or can I repair it?
Here's the worst part though, the wire broke at the exact point where it exits the bell housing.
Is this going to be a big problem? Or can I repair it?
Thread Starter
Seasoned Member
Joined: Dec 2016
Posts: 391
Likes: 10
From: Lawrence ****ing Kansas
Year: 1997
Model: Cherokee
Engine: 4.0
nevermind, it was snapped at the CPS itself (I thought maybe the sensor was inside the bellhousing, and there was so much grease you couldn't see anything)
I was able to remove the CPS, it wasn't very hard with the head removed and with a good, stubby 3/8" ratchet. Guess I need a new CPS though
I was able to remove the CPS, it wasn't very hard with the head removed and with a good, stubby 3/8" ratchet. Guess I need a new CPS though
Thread
Thread Starter
Forum
Replies
Last Post
BimmerJeeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
37
Sep 10, 2017 12:07 PM
Mikeythrash
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Jan 4, 2014 10:52 PM
White Elephant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Jul 10, 2012 05:55 PM
Soaper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Oct 24, 2011 02:55 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
