I know alot of people ask this Q. but I don't have a tape at my house to check for myself. so when I got this cherokee he said it was rubicon 5.5 lift with long arms. I know it has long arms because they are easy to spot heh. but I was just wonder does this look like a 5.5 inch lift? its on 33's btw. sorry for the muddy pics its the only one that really shows the front end. I'll try and take some better ones later

 

Yep that looks like 5.5" lift and 33's..

 

thats def 5.5 with 33''s, when you do get a tape measure, stock is 17.5 from center of hub to bottom of fender flare in front and 17 from hub to bottom of flare in rear, hope that helps

 

Yea if it has the stock fender flares and still has 33"s then it is with out a doubt bigger than 5".

 

awesome, yeah I knew it had 33's just kinda wondering on the lift size. cool yeah I thought so, just bored at workd and was just double checking.

 

Nice rig.....I've been leaning towards the same setup as you have and seeing your XJ just made my decision alot easier.

 

yea I need to try and bend that bumper back on the right side its push'd in alittle. but I'm very happy with it. I might be moving up to 35's soonish

 

Measure from the center of the rim to the bottom of the fender flairs.. Stock front 17.5" rear 17". Just subtract that from the measurements and you will know roughly how much lift you have if the flairs are stock and not cut.

 

First off never appoligize for the mud. Very nice rig. 35s will def. look badazz, you may have to trim a little and bumpstop.