If you heat the tubing a little with a blow dryer if will form a little better then you have to glue it on.

 

then hold it in place for 3 hours while the glue drys? Yeah ok

Seriously bud i have tried every thing no hose will stay on those corners

: Discussion Closed :

 

nice write up mines the same except i used 3" stainless exhust pipe and a 6x9 K&N cone

and ill have to build that heat shield there...seein as im on a budget again thanks to the holidays

and ill show you ill use hose ill just zap strap it every couple inches

 

I am going to make one on my day off.......Thanks for the info.

 

I see in the back you added a smaller cone filter for the pcv? Was that pretty simple? do you get any blow by through it?
Nice job btw.

 

I built mine basically like Rustys tube. 3" exhaust pipe a heater hose fitting and some scrape steel.

 

Are these technically legal? I was watching true life on mtv-streetracers, and people were getting their cars inspected by cops, and one cop cited a guy for having a mod. intake, and many other things of course. The cop said that it didn't have like an inspection tag or something. I know that we're not streetracing or anything, but jw.

 

Same basic thing..used the remains of a cut up aem intake pipe my friend had off his car. Sprayed it black. For the bend off the throttle body i just pieced together some parts from Autozone. 90* angle, 2 rubber couplers, some clamps. And a filter cover thing off one of my friends cars.

 

Pretty sure that was California. And arent there laws regarding performace mods extremely strict?

And i dont think a cop will ever ask you to pop the hood in a jeep lol.

 

Yeah I just thought it was weird that it happened. We're not all going to be racing our jeeps around with our fancy intakes and getting busted I don't think.

 

That would suck no matter what! I'm glad I don't live in Cali Hell I don't even have a Cat! HA

 

yea they do that here in canada(more back east) but the only time its gunna happen is if you get busted during a street race raid where they block the area and so on in which case ive seen vids where they were checkin every vehicle that gets caught up in the raid

only other time that happens is if you are drivin a "street racer" car and ive only heard of it happening once here in BC either way its total crap cause not everyone who runs modded vehcles is street racing

but like some else has said your its unlikely you will be asked to pop the hood more likely to get hassled for lift,tires and rusty/dented body panels and exhaust or lack of

 

I drove with my windshield like this for about 2 weeks! https://www.cherokeeforum.com/f2/bad-way-wake-up-10420/
If you are going to do a cold air intake, do you guys think replacing the pcv hose with a small filter would be better, like KEATON, or running the hose like XJJEEPTHING? The hose is used to help warm the engine up right? I thought if I was going to do this, I saw someone else had done this, but not for intake, but cut your hood, and put some vents in it? I think that would work well, and look BA

 

i wish there were more things you could custom fab for bolt on performance parts, cai is in the bag