help with ubolt conversion
11-17-2010, 07:27 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2010
Location: north central oklahoma
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92 laredo
Model: Cherokee
Engine: 4.0
help with ubolt conversion
Ok so i drilled out my yoke on my 8.25 rearend to put ubolts in but the nuts will not go on because the ubolt holes are to close to the yoke i did exactly what another post on here said and drilled out with 5/16 bit and used the ford ubolts any ideas o thought i might be able to dremel out so the nuts will fit but i am not sure if i jacked it up is there some place that sells the conversion kit for my rearend
11-17-2010, 09:17 PM
#3
Junior Member
Thread Starter
Join Date: Nov 2010
Location: north central oklahoma
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Year: 92 laredo
Model: Cherokee
Engine: 4.0
i looked and could not find the ubolt style for the 8.25
looked already but i got it to work just a little work with the die grider
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Aw4 Transmission 67xxx miles
JeepStephie99
Engines/Tranny/T-Case
14
11-19-2015 11:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
