help tcm no shifter signal!!!
Ok the jeep is a 98 cherokee, 4.0. It's getting a p0705 code. I ve replaced the neutral safety switch and the code still trips. I also swapped in a used pcm, still trips. It is not a hard fault because I can drive it for about a weekend sometimes before it throws the code. Any help will be appreciated.
Junior Member
Joined: Nov 2009
Posts: 36
Likes: 0
From: Ogden, UT + Plaistow, NH
Year: 93
Model: Cherokee
Engine: 4.0
http://www.tankota.net/repair/Repair...a/cip0705p.pdf
this might be helpfull. looks like your switch could be bad. I think it is located on the side of the transmisison.
-Brian
this might be helpfull. looks like your switch could be bad. I think it is located on the side of the transmisison.
-Brian
Thanks for the reply. I found someone had added a relay for either fog lights or stereo and tapped into the vihicle harness, causing this sensor to malfunction. People shouldnt add parts if they dont know what they are doing!
Thread
Thread Starter
Forum
Replies
Last Post
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Jul 8, 2023 07:08 AM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 29, 2015 08:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



