help only sparking on fist 3cyls
#1
Newbie
Thread Starter
Join Date: Jun 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
help only sparking on fist 3cyls
here we go this is my bros jeep 99 sport 4.0 he went to work and it ran fine tried to start it after work and it would not run
so far he has put in a new dist,cap,rotor,wires,plugs,coil,and still no spark then he put in a new cps and it runs but i am only getting spark at cyl1,2,3 any ideas i used my timing light and it wont strobe on 4,5,6
i have checked tdc compression stroke and its fine
so far he has put in a new dist,cap,rotor,wires,plugs,coil,and still no spark then he put in a new cps and it runs but i am only getting spark at cyl1,2,3 any ideas i used my timing light and it wont strobe on 4,5,6
i have checked tdc compression stroke and its fine
#2
Seasoned Member
Join Date: May 2009
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
here we go this is my bros jeep 99 sport 4.0 he went to work and it ran fine tried to start it after work and it would not run
so far he has put in a new dist,cap,rotor,wires,plugs,coil,and still no spark then he put in a new cps and it runs but i am only getting spark at cyl1,2,3 any ideas i used my timing light and it wont strobe on 4,5,6
i have checked tdc compression stroke and its fine
so far he has put in a new dist,cap,rotor,wires,plugs,coil,and still no spark then he put in a new cps and it runs but i am only getting spark at cyl1,2,3 any ideas i used my timing light and it wont strobe on 4,5,6
i have checked tdc compression stroke and its fine
after what you've changed... check camshaft position sensor..
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
91cherokeeSC
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
41
10-29-2015 01:49 PM
Jeremy Millner
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
10-02-2015 02:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)