md1032

98 cherokee 4.0 i6


I just changed out the coil and still no spark... I can hear the fiul pump running and it turns over just fine. But it won't start

I thank you for any help.

must fix soon so I can get to work

nasonguy

no spark to any of the spark plugs? or just one?

Abovetimberline

Check your cps,first unplug it and clean connector and clean pick-up on bellhousing and see if it helps,if not check resistance on terminals b and c should read very low or open.

md1032

no spark at all... ill check the cps now. where is it?

Abovetimberline

top left side of bellhousing,pita to replace,try and clean the pick-up with some electrical cleaner first and clean the connector where it plugs in.

BuckB91XJ

X 2, a bad (CPS) Crank Position Sensor kills your spark timing pulse and fuel injector fire pulse so you're most likely not getting spark or fuel to the cylinders. I hope cleaning it works for you. It costs right around $80 for a new one at your friendly neighborhood Autozone store.