Help me idnetify this part and EXACTLY where it goes.
Thread Starter
Member
Joined: Sep 2011
Posts: 249
Likes: 0
Year: 00'
Model: Cherokee
Engine: l6 4.0l 242.c.i.
Help me idnetify this part and EXACTLY where it goes.
A quick search of the number on it says its a capacitor but I have no clue where it goes or what it plugs into. Im finishing up my cyl head swap and I must have removed this piece at one point but have no memory of it.
Senior Member
Joined: Oct 2011
Posts: 763
Likes: 1
From: Warren, PA 16365
Year: 2001
Model: Cherokee
Engine: 4.0L
I did some searching and this is what I came up with:
That's all I could find, but I didn't put much effort into it.
its a .47 microfarad capacitor...there are two numbers on it
it has a single wire, mounts through a bolt in the cylinder head, and has 1 single wire with a slide on plastic connector
it has a single wire, mounts through a bolt in the cylinder head, and has 1 single wire with a slide on plastic connector
That's all I could find, but I didn't put much effort into it.
Senior Member
Joined: Nov 2011
Posts: 596
Likes: 7
From: Tallahassee, FL
Year: 1998
Model: Cherokee
Engine: 4.0
I was having the same problem, it didn't fit over that stud that holds the dipstick in as I first thought where it went, but then found the new (used) engine had a bolt screwed in where the original motor used a stud with a smaller threads to slide the part above on.
Bryan
Bryan
Last edited by bryweb; Apr 21, 2012 at 11:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
erupert66
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 15, 2015 02:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)