What kind of lift is it? Any changes in the track bar or drag link mounting? Does it have any new brackets for the track bar? A pic of the front end would help!

 

its the rough country 4.5 lift.

 

Did you use a whole new trac bar for the install or one of their brackets?

 

i had to drill a new hole a 3/4 from the old hole.

 

That may or may not be a problem aswell, but first things first I would get it aligned.

 

will the track bar effect the alignment

 

Anything to do with steering changes and suspension changes can effect the alignment.

 

Yes it can. The track bar keeps the axle "centered" laterally under the front end.

 

should i get an adjustable track bar than get an alignment or do the alignment first

 

Well if you plan on getting an adj tracbar in the very near future then by all means go for it then get the alignment.

 

hmmm. I have to figure out what to do. thank god i own 2 vehicles. I hate to park the jeep till i can get it fixed.

 

Tis the story of every jeepers life

 

Don't let that shaking slow you down. Look for the silver lining. Bring some milk and ice cream and make a milkshake.
Seriously check that everything is tight and that the bushings that you re-used are not soft or dry rotted. That and the wheel balancing is about all you can do other than the trackbar that was already mentioned.

 

well i just had the wheels balanced Monday, and the bushings are new. I guess i could drive it tomorrow and see. I just don't want to shake my jeep to pieces.

 

I notice driving into work today that the front squeaks and creaks alittle. I know it might be still settling. Am I correct or should it be done settling by now.