Help With HEadunit
#1
Newbie
Thread Starter
Join Date: May 2010
Location: Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 inline 6
Help With HEadunit
i can turn my key to the accesories and on position and the radiostation plays fine but when i start the jeep it has a bad crackle in the sound. doesnt do it with a cd or ipod just radio. I know its not headunit tuner because this is a new install from subwoofers to headunit and wiring. any help is apreciated thxx
#3
Newbie
Thread Starter
Join Date: May 2010
Location: Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 inline 6
the antenna is tight and i know its not the antenna because it only does it when the vechicle is started, which grounds would you suggest to check first or to start with
#5
Newbie
Thread Starter
Join Date: May 2010
Location: Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 inline 6
im not stupid when it comes to installing these things and it didnt do it on my old one untill a week before i pulled it then when the new one was put in it still did it so i know its not the tuner and it was professionally installed even though that doesnt matter and its a 6 grand system done
#6
Junior Member
Join Date: Jul 2010
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 l6
Wooooo
First of all... relax! You didn't need to be that rude to xj_maniac_newb when all he was doing was trying to help you.
Anyways... My money is on a ground. Good luck!
First of all... relax! You didn't need to be that rude to xj_maniac_newb when all he was doing was trying to help you.
Anyways... My money is on a ground. Good luck!
#7
Newbie
Thread Starter
Join Date: May 2010
Location: Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 inline 6
well it came of as if i didnt know what i was doing, but i know its a ground me and my audio guy havent foiund anythign i was wondering if someone could help or if someone had this promblem
Trending Topics
#9
Newbie
Thread Starter
Join Date: May 2010
Location: Missouri
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 inline 6
no man my audo guy is the greatest around and a good friend and if you read the other post it did it on my old headunit also like a week or so before it was pulled so i know its nothing he did
#13
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
im not stupid when it comes to installing these things and it didnt do it on my old one untill a week before i pulled it then when the new one was put in it still did it so i know its not the tuner and it was professionally installed even though that doesnt matter and its a 6 grand system done
:P
Last edited by xj_maniac_newb; 07-26-2010 at 09:26 PM.
#14
Senior Member
Join Date: Jan 2010
Location: Brentwood, TN
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Chill out brother, neither one of these guys was attacking you. Two simple comments, one asking if you installed it and the other stating if another shop did it and if they are professionals they should be able to resolve it. You will get a ton of help on this board but not by taking offense to questions and comments. I would try to ground the unit directly to the body if you have it connected to the factory ground. Then I would just try to rewire the entire unit and bypass the factory wiring. Or remove the whole unit and have the connections tested.
#15
CF Veteran
Join Date: Sep 2009
Location: Summerville, Ga
Posts: 6,322
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Chill out brother, neither one of these guys was attacking you. Two simple comments, one asking if you installed it and the other stating if another shop did it and if they are professionals they should be able to resolve it. You will get a ton of help on this board but not by taking offense to questions and comments. I would try to ground the unit directly to the body if you have it connected to the factory ground. Then I would just try to rewire the entire unit and bypass the factory wiring. Or remove the whole unit and have the connections tested.