i dont believe so. if i remember tomorrow ill snap a few. its not noticeable unless you actually look for it, as its tucked away in the corner. i dont believe you can see it by just opening the hatch

 

Re-did mine last summer, along with the overhead console. Looks like the factory original.

 

i did mine a few years ago .. yes use the good 3m glue and another little trick that i used .. take some of the fabric to an upholstery shop . and ask them to make some buttons.. they will be pretty cheap .. then after you glue down the headliner take the buttons and push them right through the headliner and backer board .. you will never have problems with the headliner sagging . i made a dozen buttons and they cost like a buck apeice....

 

i really doubt sagging........ lol

 

you really shouldnt need to use buttons if you do it correctly lol.. the stong 3m glue is plenty.. just make sure you spray both surfaces (headboard and cloth) EVENLY but generously let get tackey about 3-5min and you will be fine!