So I was pulling the *** out and the whole safe came out. I put it back but will still come out again and now my lights don't go on at all. Any help? Thanks

 

Usually you need to push the button on-top of the headlight switch to get the shaft out. (I think it's on-top). I might check and see if possibly something is pressing the button? Like wires...OR...you are 1/2 way to installing a new switch!

 

Yep. New switch time.

 

Thanks for your post.

We’re here to help but you must understand that all Jeeps are not the same.
In order for us to give you more accurate advice and help, we must know the following, along with detailed information as to the symptoms/problems etc:

Year
Model
Engine
Transmission
Transfer case

 

Cruiser it's a
97 Cherokee Se
6 cylinder
231 transfer case

 

cool, and thanks. You might put 97 Cherokee below your avatar and fill out your profile.