cman00

Any suggestions on head liner repair?

RUSTY88

i reskined my full headliner. it was fairly easy and only took a few hours... i pulled mine out, removed what material was left, then brushed odd the the loose old foam. i have a locall glass shop that stocks headliner material, it cost me about $40 bucks + a couple of cans a good spray adhesive. i sprayed down both the new headliner and the headliner panel with adhesive. then slowly rolled out and laid down the new material... 2 people is almost a must, cuz once it sticks... it down! i'm every happy with the results! looks great, just dont skimp on the spray adhesive.

Muaddib420

http://www.4x4xplor.com/headliner.html

Get the better adhesive. 3M "yellow" brand from any parts store. Twenty bucks a can and you'll need two at minimum and three to be safe. You'll need three yards of headliner fabric. You can find that at most fabric stores like Jo-Ann Fabric.

Mattnkc74

You can get the material from most fabric stores. Not to hard to do I used the permatex adhesive in the orange can. Looked good when I finished even did the overhead console. Cost around 60 bucs with materials and 2-3 cans of adhesive.

DC Jeepin'

anyone have pictures of their results? Thanks

ZINGGG

I used the same adhesive. Works well so far, but it's only been up for a couple days.

I spent the last few days working on the headliner (only because I spent a lot of time letting it fully dry and I worked on the soundbar too - It was cracked in the middle and I used JB weld to get it to stock back together and also cleaned it up before putting it back on)

jonlee79

well theres some pics of mine came out great still have to do sun visors

jonlee79

and a bij thanks once again to JB weld the xj owner best freind

ZINGGG

It's amazing stuff. Your headliner looks good man.

jonlee79

this is where i got mine took two rolls cost $14 the glue is what cost so much
http://www.walmart.com/ip/Creative-C...Brown/16422382

ZINGGG

What adhesive did you use?

jonlee79

3-m 77 supper hold.ran out used elmers spray gue on speaker box

Mattnkc74

Mines been probably a year and a half since ive done it. The permatex has held up well no problems at all.

droopy

Here is mine. It would have turned out better if i had someone to help me but i like it