Below i have circled a few items that have gone bad on my motor. Warn Seal old and cracked rubber. Some of it looks like it was put together bad. I want to replace the Circled Items below but im not exactly sure what they are which is why i need your guys help. Note that hose on the bottom i circled i Need the whole hose not just the connecter circled. This is my first jeep could use some help and an idea of the cost of all this. Thank you.


::CF Moderator::
cruiser54
::CF Moderator::
close
- Join DateAug 2011
- LocationPrescott, Az
- Posts:43,971
- Year1990
- ModelCherokee (XJ)
- Engine4.0
-
Likes:1,979
-
Liked:1,578 Times in 1,279 Posts
Go to Napa and get new vacuum harnesses. You'll be covered that way. Take the photo with you.
Junior Member
The breather side is NAPA Part #7151367
The emission side is NAPA Part #7151366
Not sure on the other one, but bringing the pic should help.
The emission side is NAPA Part #7151366
Not sure on the other one, but bringing the pic should help.
::CF Moderator::
cruiser54
::CF Moderator::
close
- Join DateAug 2011
- LocationPrescott, Az
- Posts:43,971
- Year1990
- ModelCherokee (XJ)
- Engine4.0
-
Likes:1,979
-
Liked:1,578 Times in 1,279 Posts
Quote:
The emission side is NAPA Part #7151366
Not sure on the other one, but bringing the pic should help.
That's helpful. The problem I had at Napa was the harnesses were shown in one of their catalogs but not in their computer system.Originally Posted by JohnWongFat
The breather side is NAPA Part #7151367The emission side is NAPA Part #7151366
Not sure on the other one, but bringing the pic should help.