Some background: 91 xj, 4.0 inline 6 with manual transmission. My slave cylinder went out so I am rebuilding the clutch. I pulled the whole transmission, and upon doing so I realized I am missing A LOT of bolts. Most of the bolts connecting the bell housing to the block, as well as the bolts for the inspection plate are missing. It is a miracle the transmission was being held on at all. I have been trying to find the hardware in a kit with no luck. ARP does not carry the bolts, and I have had no luck with local 4x4 stores. I was hoping someone on here knows where I could locate the hardware for purchase, or has the specs for the bolts so that I could get them myself from the hardware store. Any help is appreciated.

 

Many times the specs for bolts are listed in the parts catalogs. Sometimes they are not.
Thinking go here:

https://xjjeeps.com/

Download your parts catalog and see if you can figure it out from there.
Some might be stuff you can pick up at the hardware store.
You will get part numbers for them and with Google see what might be available
from an online Mopar retailer if it matters.

 

Good advice from Ralph. I would not invest any time in trying to find a kit. I don't think it exists.

 

Actually thinking about it more in a way there might be.
As long as the OP can deal with used hardware.
Some Ebay sellers and some other places online have a habit of selling hardware in "sets".
Guessing when they dismantle a Jeep.
The ones that come to mind are:

https://www.ebay.com/sch/jeepgraveya...p2047675.l2562

https://deadjeep.com/

https://daveysjeeps.com/

And I would contact them even if you don't see what you need on their sites.
They might just figure nobody really wants that stuff when they dismantle a Jeep.
Also I know Davey's will ship cause I have dealt with them a few times in the past.