Guages only work when headlights on after replacing IGN Feed fuse?
04-03-2013, 09:09 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Northern Indiana
Posts: 67
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.6 Stroker
Guages only work when headlights on after replacing IGN Feed fuse?
Parked the Jeep (98 ZJ 4.0). 30 minutes later, went to start it and nothing happened, all accessories worked but turning the key didnt engage anything or make any dash idiots come on like during normal starting. I checked the maxi fuses under the hood and saw the Ignition feed 40a fuse was blown, also the ABS pump fuse was blown. I replaced the IGN fuse with the blower motor fuse (same amps) to get to my shop, then replaced both ABS and IGN feed fuse. EVerything is back to normal now except for the gauges only work when the headlight switch is turned on. So, where should my first step be in figuring out the problem? I cleaned battery terminals, checked grounds, checked fuses. Any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
Aryl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
04-10-2019 09:07 AM
XJ ONLY
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
01-26-2019 06:30 PM
BayArea93xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-11-2016 10:43 AM
petejeep95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-22-2015 11:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)