grinding noise when accelerating
#1
Member
Thread Starter
Join Date: Dec 2009
Location: chesterfield, michigan
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 6 cyl.
grinding noise when accelerating
i need some opinions.
whenever i take off quickly or accelerate and turn something sorta grinds then goes away. yea i know its not a whole lot of info, id just like some thoughts on what it could be. i did this before i put my lift and tires on too. i have a 2001 jeep cherokee sport.
happens when im on cement mostly, havent noticed it too much in the mud
whenever i take off quickly or accelerate and turn something sorta grinds then goes away. yea i know its not a whole lot of info, id just like some thoughts on what it could be. i did this before i put my lift and tires on too. i have a 2001 jeep cherokee sport.
happens when im on cement mostly, havent noticed it too much in the mud
#5
Member
Thread Starter
Join Date: Dec 2009
Location: chesterfield, michigan
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 6 cyl.
i replaced my driver side axle u joint and it still does it, im doing the other side tomorrow.
if it still does it could it be my u joints or should i do my drive shaft u joints?
if it still does it could it be my u joints or should i do my drive shaft u joints?
#7
Member
Thread Starter
Join Date: Dec 2009
Location: chesterfield, michigan
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 6 cyl.
yea the front, and now its getting worse for some reason. its louder. im gonna do the other side side axle today. and if its still not right im doing the front drive shaft,if not idk what else to do
Trending Topics
#10
Senior Member
Join Date: Mar 2009
Location: Grand Rapids, Michigan
Posts: 554
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
STOP...Its your trans mount!! Mine did the same exact thing! It kept getting worse until I installed a poly trans mount! the old one was so worn out that the metal was connecting creating a vibration.
Last edited by miglia-spyder; 05-12-2010 at 02:58 PM.
#11
Member
Thread Starter
Join Date: Dec 2009
Location: chesterfield, michigan
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 6 cyl.
okay il check it out, thanks.
it only does it when i accelerate and turn. once im driving it goes away. but it just makes this weird kind of revolving noise. like somethings spinning but thats after im up to speed crusing
it only does it when i accelerate and turn. once im driving it goes away. but it just makes this weird kind of revolving noise. like somethings spinning but thats after im up to speed crusing
Last edited by jake149; 05-12-2010 at 03:11 PM.
#12
is it your cooling fan hitting the radiator? if you have bad motor and trans mounts the motor might be moving enough for the mechanical fan to come in contact with the radiator.
#13
Member
Thread Starter
Join Date: Dec 2009
Location: chesterfield, michigan
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 6 cyl.
no the noise it lower front, i can feel it down under me. im gonna end up replacing my transmission mount i think but i dont mind too much cause tahts one more thing thatll be better on my jeep