gauge problems after swap
Thread Starter
CF Veteran
Joined: May 2009
Posts: 1,154
Likes: 1
From: Centennial ! 80015
Year: 1991
Model: Cherokee
Engine: 4.6 stroker ;)
gauge problems after swap
i just swapped clusters from a 96 to a 92 xj to get rid of the dummy lights. when i turn on power the gas gage pegs out past full !! any help will do .. also would it matter if the engine is out?
CF Veteran
Joined: Aug 2008
Posts: 6,588
Likes: 495
From: Chico, CA
Year: 1986
Model: Cherokee
Engine: 4.3L with headers and full 3" exhaust system
96 to 92 may not be compatible. There was some design changes in 96. It sounds like that wire has gone to full ground. The way gas gages work is to meter the amount of grounding and thus the distance the needle moves. You will also need oil pressure and coolant temp senders. The coolant temp may not be compatible since it is OBDII
Newbie
Joined: Aug 2009
Posts: 6
Likes: 0
Model: Cherokee
gage problem
CF Veteran
Joined: Jul 2009
Posts: 2,158
Likes: 11
From: Chico,ca
Year: 89
Model: Cherokee
Engine: 4.0
I had the same proble with mine,mine is an 89 and I tried to put a later model pump assembly in it and it read full,because the sending unit is opposite of mine,when i took it out and placed it at full it read empty,I already had the pump out so I just used my old one.
Thread
Thread Starter
Forum
Replies
Last Post
frantic29
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
Sep 26, 2015 04:30 PM
Jose Calderon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
17
Sep 17, 2015 08:57 PM
Cherokee1998xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Sep 3, 2015 02:26 AM
ammonllewis1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 31, 2015 11:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
