::Gauge Cluster Swap?::

Reply Subscribe

Thread Tools

Search this Thread

Jul 28, 2010 | 03:55 PM

BigC9164

Thread Starter

Senior Member

Joined: May 2010

Posts: 611

Likes: 2

From: Austin, TX/ Atlanta, GA

Year: 1999

Model: Cherokee

Engine: 4.0

::Gauge Cluster Swap?::

i have a 99 xj 4.0 np231 ax15.
Being that its a manual i need a tachometer!! and i have to dummy light cluster. if i find or order the one with real gauges is it just a cluster swap or do i have to install different sensors?
THANKS! ~Caleb

Jul 28, 2010 | 04:36 PM

BigC9164

Thread Starter

Senior Member

Joined: May 2010

Posts: 611

Likes: 2

From: Austin, TX/ Atlanta, GA

Year: 1999

Model: Cherokee

Engine: 4.0

bump

Jul 28, 2010 | 04:45 PM

Metmknice

CF Veteran

Joined: Oct 2008

Posts: 2,127

Likes: 2

From: Hell, CA

Year: 1989

Model: Cherokee

Engine: 4.0L I6

For the later models, I believe that the sensors are all there and the same PN light vs gauge. Should be a direct swap and really simple. 97-01 cluster is what you need.

Jul 28, 2010 | 05:03 PM

Bustedback

CF Veteran

Joined: Feb 2010

Posts: 12,367

Likes: 23

From: Oroville, CA

Year: 1995

Model: Grand Cherokee

Engine: 4.0 with all of the noise and clatter

The oil sender will be different, and maybe the temp sending unit too.

Jun 26, 2011 | 07:49 PM

BigC9164

Thread Starter

Senior Member

Joined: May 2010

Posts: 611

Likes: 2

From: Austin, TX/ Atlanta, GA

Year: 1999

Model: Cherokee

Engine: 4.0

Just completed the swap. For 97+ there is no need for sensor swaps. Just take apart the dash (really really easy!) and pull the old cluster out and put the new one in.