Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Fuse keeps burning out.

Thread Tools
 
Search this Thread
 
Old Mar 7, 2010 | 02:10 PM
  #1  
bigdog7766's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 5
Likes: 0
Year: 1995
Model: Cherokee
Default Fuse keeps burning out.

I have a 1995 Jeep Cherokee Sport, and I just put in a Sony CDX-GT24 stereo and now that i have it all hooked up, the fuse keeps burning. I dont know if i have the wrong wires connected or what...
Reply
Old Mar 7, 2010 | 02:12 PM
  #2  
zfranklin92's Avatar
Seasoned Member
 
Joined: Aug 2009
Posts: 342
Likes: 0
From: Traverse City, MI
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Default

i had the same issue with my light bar and there was some bare wire up against the firewall. check the ground?
Reply
Old Mar 7, 2010 | 02:19 PM
  #3  
junk yard customs's Avatar
Newbie
 
Joined: Mar 2010
Posts: 24
Likes: 0
Model: Cherokee
Default

Originally Posted by zfranklin92
i had the same issue with my light bar and there was some bare wire up against the firewall. check the ground?

I agree a bare wire or you might have the power antenna or the memory wire hooked up wrong.. Make sure you do not have a bare wire touching another one...
Reply
Old Mar 7, 2010 | 02:25 PM
  #4  
bigdog7766's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 5
Likes: 0
Year: 1995
Model: Cherokee
Default

now that i think about it, there were two blue wires that were not connected to anything, but there was no metal showing, they were still covered with the rubber....
Reply
Old Mar 7, 2010 | 02:29 PM
  #5  
junk yard customs's Avatar
Newbie
 
Joined: Mar 2010
Posts: 24
Likes: 0
Model: Cherokee
Default

Originally Posted by bigdog7766
now that i think about it, there were two blue wires that were not connected to anything, but there was no metal showing, they were still covered with the rubber....

Normally the blue wire is a switch power for an extenal amp a. maybe the antenna. I would tape or put a small wirenut to be sure
Reply
Old Mar 7, 2010 | 02:34 PM
  #6  
bigdog7766's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 5
Likes: 0
Year: 1995
Model: Cherokee
Default

now if its not the blue wires, and i have no bare wires, what could it be?
Reply
Old Mar 7, 2010 | 03:01 PM
  #7  
caged's Avatar
CF Veteran
 
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
Default

did you use a harness, or just hack and tap(e)?
Reply
Old Mar 7, 2010 | 03:41 PM
  #8  
lestatsghost's Avatar
Member
 
Joined: Aug 2009
Posts: 137
Likes: 2
From: Centinnial, CO
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

are you using the correct black wire for ground? I have 2 black wires one slightly larger than the other the larger one is the ground and the smaller one is to a speaker.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bookspans
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Mar 17, 2021 07:41 PM
Morris4x4Center
Vendor Showcase
0
Sep 25, 2015 11:57 AM
Dustan Francis
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Sep 19, 2015 10:40 AM
Tsunami
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 10, 2015 09:56 AM
sikkev
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 5, 2015 11:33 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:45 PM.