Fuel gauge/sending unit
Thread Starter
Newbie
Joined: Sep 2013
Posts: 44
Likes: 0
From: SW Florida
Year: 1996
Model: Cherokee
Engine: 4.0 I6
Alright, since i bought my 96 xj my fuel gauge has not worked. When i fill up the tank it shows its full, but with 20 miles the fuel light comes on. With just putting larger tires on and about to lift it i would like to fix this problem. any help or input from you guys on how to fix it would be helpful.
More then likely its the fuel sending unit in the tank but could be the gauge to test this turn the key on and unplug the connector at the tank the fuel gauge should go empty. Now with a test light connected to ground you need to hook it to the fuel sending wire and the gauge should read full. I'm not sure what wire it is but most pumps have four 1 power and 1 ground for the pump and 1 ground and 1 signal wire for the gauge. If it has three wires then its just using the same ground for the pump and gauge.
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
Aug 11, 2020 03:22 PM
Chick-N-Picker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Sep 7, 2015 07:56 PM
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 6, 2015 03:39 PM
Ricardo Siqueiros
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Sep 3, 2015 09:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



