Front end popping and grinding
#1
Seasoned Member
Thread Starter
Join Date: Oct 2012
Location: Bonney Lake
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
2000 jeep cherokee 4" lift, 31 9x5 Front end is making a lot of popping and grinding at low speeds. Coming from driver side front. It feels like there's is resistance in the forward movement when the noises happen. Also brake light comes on periodically when breaking and the noise is occurring. Any help would be appreciated. Thank you in advance.
And brake pedal sticks to the floor Brake light and brake pedal going to the floor only occur when the noises are occurring and while turning the wheel. Going forward and reserve in the driveway with NO turn of the wheel the brakes are fine and very little noise.
Also found these grooves in the knuckle where the caliper sits
Also found these grooves in the knuckle where the caliper sits
Last edited by livin2xs; 11-19-2013 at 09:03 PM.
#6
Seasoned Member
Thread Starter
Join Date: Oct 2012
Location: Bonney Lake
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#11
Senior Member
Join Date: Dec 2011
Location: Central Arkansas
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
Yep, wheel bearing. Same thing happened to me. Advice for anyone this happens to... DON'T try to limp it along very far. A bearing that far gone will get much worse VERY quickly and could fail catastrophically on the road.
#12
Seasoned Member
Thread Starter
Join Date: Oct 2012
Location: Bonney Lake
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
X2. I drove it about a mile and it was all over the road. Luckily I was on a slow road with little traffic
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-30-2015 08:06 PM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-23-2015 07:12 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)