Front End
#1
Junior Member
Thread Starter
Join Date: May 2009
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L HO
Front End
So I'm looking to redo the front end. All my ball joints, bearings, tie rods, pitman arm drop, and new axle seals. I got a 4.5 inch lift with 33's just wondering if there is anything aftermarket for this kind of stuff, and if anyone knows a good kits. the reason why i'm redoing the front end is hasn't been done yet and i have a little bit of death wobble with brand new tires. When i got my alignment done my toe was in and he said i should get a new pitman arm, tie rod and repack my bearings. but i figure just replace everything.
#2
Member
Join Date: May 2010
Location: Virginia
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Well the bearings are a sealed unit in the dana30 so you have to buy the whole unit bearing assembly and all of this work is pretty easy except sometimes to bolts for the unit bearing freeze up.
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-30-2015 08:06 PM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-23-2015 07:12 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)