front driveshaft balance
06-28-2013, 12:16 PM
#1
Newbie
Thread Starter
Join Date: Jul 2011
Location: Morrisville, PA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
front driveshaft balance
I removed my front driveshaft a few months back doing a clutch job and left it off until recently. I painted the connection to the diff. to determine which way it goes back on but neglected to paint the transfer case end. recently put it back on and seem to be getting some vibrations currently and wondering if it matters which way it goes on the transfer case end.
Thanks.
Thanks.
Last edited by Hoopty1111; 06-28-2013 at 12:20 PM.
06-28-2013, 11:34 PM
#3
CF Veteran
Join Date: May 2012
Posts: 1,064
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
It shouldn't matter. I've never marked a driveshaft to put it back in exactly how it came out, always just stuck it back up there however. And I've never had any vibration from any of my driveshafts. Are you sure the vibration is coming from the shaft?
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-03-2015 06:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)