What size is the nut that holds the hub on and does anyone have pics for me to look at cuz mine is almost wore out. I'm fixing it tonight. Thanks

Its a 36MM i just did mine recently jack it up put the axle on jack stands take off the 36MM your going to need a big breaker bar for that or a nice impact gun unbolt the caliper and take the rotor off then theres three bolts behind the wheel there are 3 13MM 12point bolts break those lose and it will come off. Go Timken there expensive 250 for 2 but theyre worth it.

Ok, thts what I was thinking. The part store said the bearing comes in the hub. What is it torque to? This ha already helped out. Thanks.

75lbs for the 3 13mm and 175lbs for the 36mm..just did mine last weekend!

Break loose the 36mm before you put it on jack stands, it can be a pain to get off sometimes. I think its tighten to 150 ftlb or something. I never torqued mine, just made it really tight.

Sweet, thanks guys.

Well it's done now, had to torch the old u joint out! But the new went in great!. Thanks for the help.