i am going to be installing fog lights tomorrow and i was wondering if i had to do all this extra wiring if i already have the factory fog light switch. i found the wires taped to the underside of the bumper. i have a 91 lerado if that helps. im trying to hook up the "navigator driving lights"

 

I think it will work.. if nothing else, you could use the old switch and run new wire..

good luck

 

if they are 55 watt lights use the factory wireing you'll be fine

 

how would i go about connecting that?

 

are there holes in the bumper allready?Use them to mount the lights to.Now with the switch on and your low beams on ,test to see withch is the power wire,then hook them up basicaly.the lights will only come on if your head lights are on the low beams.

 

here are some pics

 

your gunna have to change those ends to spade or round witch ever you have,matching the other end on the jeep.( male/female )

 

idk whatever this is i think its female

 

yeah thats the stock plug,you'll need to cut that off and put on new ends

 

the green should be positive so go green to red black to brown

 

can i cut that off then cut off the circle and the male part on the new lights and just pretty much hardwire them together with electrical tape

 

or is black hard to tell

 

yes as a temp its better to use connectors

 

its black
so do you think i should just rewire everything?

 

no just go black to black, red to green