Fog lights
Thread Starter
Junior Member
Joined: Jul 2012
Posts: 49
Likes: 0
Year: 1999
Model: Cherokee
Engine: 4.0 L
I have a 99 cherokee, with the stock bumper, that has the 2 cut-outs for fog lights, and i want to put them in. Where would i find the factory ones that will bolt right in place, as well as a possible kit for wiring, and how would one go about wiring them, i know that there is a place on the dash for the factory fog light switch (right by the rear window defroster switch and rear wiper switch), but still need a little more info on the wiring, and how to install that switch. And are there any fuses or relays that have to (or should) be used with those lights. I'm currently an automotive student, currently learning electrical, but i'm not an expert yet. And i could do this installation as a class project
TIA
TIA
CF Veteran


Joined: May 2008
Posts: 5,188
Likes: 6
From: Bristol,Pa
Year: 94
Model: Cherokee
Engine: 4.0L
Agreed the wiring is probably there.
For lights and brackets check out the part out's in classifieds, or a vendor like Quadratec for new.. ebay probably has them also.
Tip: ZJ lights are the same, but the brackets differ.
For lights and brackets check out the part out's in classifieds, or a vendor like Quadratec for new.. ebay probably has them also.
Tip: ZJ lights are the same, but the brackets differ.
CF Veteran
Joined: Aug 2010
Posts: 8,357
Likes: 103
From: Canton, MI
Year: 1999
Model: Cherokee
Engine: 4.0
Check your PDC to see if the Fog Lamp Relay #1 has any pin cavities in it that the relay would plug into. If not, your Heep is not wired for fog lamps.
Pic of PDC shows a complete compliment of relays and fuses. Not all XJ's are outfitted this way.
'99 PDC:
Pic of PDC shows a complete compliment of relays and fuses. Not all XJ's are outfitted this way.
'99 PDC:
Junior Member
Joined: Mar 2013
Posts: 43
Likes: 0
From: Conshohocken, PA
Year: 2001
Model: Cherokee
Engine: 4.0
I bought
pair of fog lights off of Amazon for my '01. Very rugged, bulbs included, and work great! Mine was already factory wired for them though.
Trending Topics
I had these on my Jeep, and I blew one out on a trail one day, the frame was mangled and the plastic was gone. If you could fit the 4" Rigid Industries LED lights in there, because those are very durable and would look sick if you could afford the 200$ a piece for them.
Seasoned Member
Joined: Sep 2013
Posts: 362
Likes: 2
From: LI, NY
Year: 2000
Model: Cherokee
Engine: 4.0
I bought THIS pair of fog lights off of Amazon for my '01. Very rugged, bulbs included, and work great! Mine was already factory wired for them though.
+1 on these lights. I just got them last week. they are identicle to stock and work great. That was the cheapest I could find too. If you have the wiring then you just need a switch, a relay, and 4 bolts for the brackets. I had foglights already that were destroyed so it was plug and play for me.
+1 on these lights. I just got them last week. they are identicle to stock and work great. That was the cheapest I could find too. If you have the wiring then you just need a switch, a relay, and 4 bolts for the brackets. I had foglights already that were destroyed so it was plug and play for me.
Here's how I hijacked the factory wiring all but the very end bits. should you want a factory switch or 3 switch panel with switches, I have them.
https://www.cherokeeforum.com/f2/97-...x-long-145729/
https://www.cherokeeforum.com/f2/97-...x-long-145729/
Thread
Thread Starter
Forum
Replies
Last Post
RyanHardin1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 10, 2015 08:21 AM
BillyBoy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 8, 2015 10:25 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



