how much fluid goes into a cherokee 231 transfer case

 

1.5 quarts or up to the filling hole.

 

ya i did that and i also put a sye in it and it still is comin out of the seal that is up against the yoke

 

then there is something wrong with the sye..
take a pic.

 

ok i will see wat i can do. i also work at a mopar dealership and they say my breather hose could be clugged also

 

could be, could be also the seal is on backwards...

 

u got a pic of one so i could show me how it goes in

 

it's a common seal, has a lip at the center that goes towards the inside.

 

my jeep has a lip on both sides i got mine from porc

 

did you install the seal or was it already on?

 

well i installed another one because the original seal was junk where do u get ur seal from and i will just have to try a different brand seal

 

http://www.performanceoffroadcenter....oducts_id=3936 thats the seal i have

 

http://www.performanceoffroadcenter....roducts_id=153 thats the kit i have

 

ok when you install the tail cover you push it around the shaft and there you have to be very carefull to not bend the lip of the seal to the outside or scar it. I suggest you remove the tail cover and check the seal lip condition, if it's good and the spring is tight aroud it give it another try and be sure you don't reverse the lip orientation.

 

ok man thank you for all of ur help i will try that and let u know how it goes thanks again