This fender is makin me mad
#1
Newbie
Thread Starter
Join Date: Aug 2009
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
This fender is makin me mad
So i wrecked my jeep a little bit back and bashed in my fender near the door gap so i decide to finally fix it. The bolts are in there preety good its a 91. After about an hour i got the top 4 off then like 45 min later the bottom two. I know theres two on the inside of the door but is there anymore in the front? and how do you guys get them off without them stripping and stuff.
#2
CF Veteran
Join Date: Jul 2009
Location: Chico,ca
Posts: 2,158
Likes: 0
Received 10 Likes
on
9 Posts
Year: 89
Model: Cherokee
Engine: 4.0
There is two more in the front held on by nuts,they are easy to get off,just need to remove headlight bezel and you maybe able to get it off without removing the front header but I have always found it easier to just remove it. You may want to use some penetrating oil on the stuborn ones.
#3
CF Veteran
there is also 2 down below the headlights on the air dam thing.
and one up inside the wheel well, behind the plastic inner fender. it is on a brace right about center of the wheel opening inside about an inch or so up from the flare. i just break the bond holding it together. it's a bit of a bugger.
and one up inside the wheel well, behind the plastic inner fender. it is on a brace right about center of the wheel opening inside about an inch or so up from the flare. i just break the bond holding it together. it's a bit of a bugger.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)